How easy is it to install Interlock Brick Kanata on your own?

In the last blog, we have seen the very first steps you need to install an interlocking brick paving project on your property all by yourself. We have also seen the various benefits of this project, especially when you it completely on your own. To remind you, here is what the main benefit of the work is. You get to save a whole lot of money and give you the freedom to do the work when you want and exactly as you want. Now, in this blog, we shall just continue to show you the rest of the steps needed to install an interlocking brick paving project on your property all by yourself.

To recap, you first need to plan the Interlock Brick Kanata project and then choose the pavers. Now, let us see the next steps.

1) Gathering the material: Now that you have planned the job and know what to do, you need to have the goodies, or rather the materials to do the work with. These materials of work include splitter or masonry saw, a vibrating plate compactor, a number of shovels, a couple of brooms for sweeping, a grading rake, a rubber mallet, adequate quantity of concrete sand, wooden pipes, strings and stakes, and a hand level. Now, some of these items are certainly hard to get. That is why you can take them on lease from construction companies, Landscape Contractors in Kanata or other suitable companies.

2) Dig up the base: Now that you have got the materials all in one place, you need to go to the next step. This involves digging up the base of the area where the work is to be done. This step is one of the most important one because without a proper base, the project will be almost impossible to carry out. The excavation needs to be at least of several inches to make a difference. You may want to get in touch with the local utility services so that they can dig a line a few days before your starting. This way, you know where the utility lines are and will not be damaging them. The way to dig is easy. Remove the loose and unstable soil until you reach the compact and denser earth.

How deep do you need to dig? This depends on the type of the project or excavation. If the project is for average pedestrians, then you need to dig 9 inches deep. If the base is for vehicle traffic, you need to dig to 8 inches.

3) Sanding: The next step is to bring in the sand. This means that you need to create a sand base that is not thicker than 1.5 inches. The quality of sand matters considerably. According to the industry, you should use specific kinds of aggregates and sand for these kinds of work.

This does not by any mean finish the project. However, the steps you have seen here are the mains steps. Other things you need to do are prepare the restraint, place the pavers, compact or level the area, give a second sanding, and seal the pavers.

Conclusion

When the scope of such a Interlock Brick Kanata project is small, you may be able to do this on your own. However, if the project is quite large, then you will certainly need the help of a professional agency such as Evergreen Interlocking Brick Specialists. It is a company based in Ontario Canada, and offers highly useful services such as development of patios and kitchens, walls and walkways, driveways and steps, interlocking bricks, pool interlock, water features, rock gardens, decks and fences.

Leave a Reply

Your email address will not be published. Required fields are marked *